Siser® EasyPSV Permanent Sticker Vinyl 12"

Siser® EasyPSV™ Permanent is a pressure-sensitive adhesive vinyl built to stay put. Where a removable vinyl is made to come off cleanly, Permanent is made for decals, signage and labels you want to survive handling, weather and washing — on hard surfaces that will not be redecorated next season.

26 colors, 12" wide, with a stylish matte finish that reads modern rather than plasticky, and layers cleanly for multi-colour designs.

Why EasyPSV™ Permanent

• Permanent adhesive — bonds firmly and stays bonded
• Matte finish — a flat, modern look with no glare
• Layerable — stack colours for multi-layer decals
• Cuts and weeds cleanly — 45° or 60° blade, no mirroring needed
• Built for hard surfaces — glass, metal, plastic, ceramic and sealed wood

Best for

• Decals, labels and stickers
• Tumblers, glassware and drinkware
• Signage and window graphics
• Vehicle and equipment lettering

Specifications

• Material: PVC
• Adhesive: Permanent
• Liner: 78# kraft paper
• Finish: Matte
• Thickness: 76.2 microns / 3.0 mils
• Blade: 45° / 60°
• Layerable: Yes
• Width: 12"

Applies to

• Glass & mirrors
• Metal
• Plastic
• Ceramic
• Sealed wood

Not recommended for painted drywall or freshly painted surfaces — a permanent adhesive can lift paint on removal. Use EasyPSV™ Removable for walls.

Cutter settings

• Cricut: Standard blade · Vinyl setting
• Silhouette Cameo: Standard blade, 2 · Vinyl Glossy · Speed 7 · Force 8
• Brother Scan N Cut: Standard blade, 3 · Cut speed 1 · Cut pressure 1
• Roland GS/GX-24: 45° blade · 80–110 gram-force · Offset .250 · Speed 50 cm/s
• Graphtec: 45° blade · 9 gram-force · Tool CB09U+0 · Speed 50 cm/s
• Titan Series: 45°/60° blade · 55–60 gram-force · Speed 180 mm/s

Cut with the liner side down. Do not mirror adhesive vinyl.

Application

1. Cut your design liner side down — do not mirror.
2. Weed the excess vinyl.
3. Lay application tape over the design and burnish with a squeegee.
4. Lift the tape and vinyl away from the paper liner.
5. Position on your surface and burnish again to fully adhere.
6. Peel the application tape away slowly, leaving the design behind.

Clean and dry the surface first. Adhesive reaches full bond strength over 24–48 hours.

Care

• Not recommended near flame or heat sources
• Do not put in the microwave or dishwasher
• Hand wash decorated drinkware

Worth having on the bench

• Siser Weeder — for precise weeding of intricate designs
• Siser Application Tape — ensures a smooth transfer to the surface
• Siser Squeegee — adheres the vinyl and drives out air bubbles

Questions?

Total Ink Solutions
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone: 201-487-9600 · Fax: 201-487-9620
Email: sales@totalinksolutions.com

At-a-Glance Specifications

Resources

Siser EasyPSV Application Instructions → Siser Brochure & Catalog →

Watch & Learn

EasyPSV Cutting Tips — Siser North America

How to Use EasyPSV Application Tape — Siser North America