Extreme 270° Low Cure - All Fabrics

Extreme 270° Low Cure Plastisol Ink – All Fabrics is a high-opaque ink that fully cures at just 270°F — one low-temperature ink for cotton, polyester and blends, so you can run mixed garment types without scorching heat-sensitive fabrics or triggering dye migration. CPSIA-compliant and phthalate-free, made in Hackensack, New Jersey.

Quart, gallon and 5 gallon. Low-cure. Made in the USA.

Always run a test print first. Before any production run, print and fully cure a test on your exact garment and check opacity, hand, dye migration and wash-fastness. It's the best habit in the shop — if you're not sure on settings, call us at 201-487-9600 before you run the job.

What it prints on

• All fabrics — cotton, polyester, 50/50 and tri-blends
• Ideal where you run mixed garment types on one screen setup
• Low cure fights scorching and dye migration on heat-sensitive fabrics

Printing & curing

• Mesh: 110–160 for opacity; higher for lighter prints
• Squeegee: 65, 75 or 80 durometer — or a 70/90/70 triple durometer
• Flash: keep it low and brief
• Cure: full ink film to 270–280°F (132–138°C) — confirm with a temp gun; avoid overcuring on poly
• Stir before use

Recommended companion products

• Quick Flash Reducer — thins for easier printing.
• Soft Hand Base — softer hand feel.
• UMX® Pantone® Mixing Colors / UMX® Mixing Kit.
• Cleanup: OPTI Wash 125 and OPTI Spot 303.

How close are we to your Pantone?

See our Standard Color → Pantone® (PMS) Match Chart — the closest Pantone® reference for every Total Ink Solutions standard color, with RGB and HEX values. For an exact, verified match, our UMX® system mixes to your target.

Safety, PPE & storage

• Wear nitrile gloves and safety glasses; avoid prolonged skin contact with uncured ink.
• Print with adequate ventilation; vent your dryer.
• Always stir before use.
• Storage & shelf life: keep sealed, out of sun. Shelf life 1–2 years. As a low-cure ink, store at 60–80°F. In high heat expect container expansion — open carefully. Do not freeze.
• Refer to the Safety Data Sheet before use.

Compliance

CPSIA compliant (16 CFR 1303 <90 ppm; CPSIA §101 <100 ppm total lead) — safe for children's apparel. Phthalate-free.

⚠ WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Questions?

Total Ink Solutions
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone: 201-487-9600 · Fax: 201-487-9620
Email: sales@totalinksolutions.com