UMX® Mixing White – Pantone® Mixing Base

UMX® Mixing White is the Pantone® mixing base—the tint white at the core of the UMX (Ultimate Mixing System)—for cotton, polyester and cotton/poly blends. Add it to lighten and build every mixing formula so you can match virtually any Pantone® color in-house. CPSIA-compliant and phthalate-free, made in Hackensack, New Jersey.

Pint, quart, gallon and 5 gallon. Heat cure. Made in the USA.

Always run a test print first. Before any production run, print and fully cure a test on your exact garment and check opacity, hand and wash-fastness. It's the best habit in the shop—if you're not sure on settings, call us at 201-487-9600 before you run the job.

What it prints on

• Cotton
• Polyester
• Cotton/polyester blends

Printing & curing

• Mesh: 110–355 depending on the print—coarser 110–160 for heavier deposit, finer 200–355 for detail and halftones
• Squeegee: 65, 75 or 80 durometer—or a 70/90/70 triple durometer for sharp edges with easy fill
• Flash: 240–260°F between colors
• Cure: bring the full ink film to 330°F—always confirm with a temp gun or donut probe, not dryer air temp

Recommended companion products

• Quick Flash Reducer — thins the ink for easier printing and finer detail without killing opacity.
• Soft Hand Base — add for a softer, lighter hand feel on the garment.
• Badass Puff Additive — mix in for a raised, high-rise puff effect.
• UMX® Mixing Colors — the 18 Pantone® base colors this white tints and builds into every match. Want the whole system? Grab the UMX® Mixing Kit (colors, white, scale and software together).
• Cleanup: OPTI Wash 125 (odor-free screen & tool wash) and OPTI Spot 303 (spot cleaning).

Custom color matching

We are a Pantone® certified company. This mixing white is part of the Ultimate Mixing System—match any Pantone® color in-house with UMX, verified under D50 lighting, standard turnaround 48–72 hours. Free software at umxsystem.com.

How close are we to your Pantone?

See our Standard Color → Pantone® (PMS) Match Chart — the closest Pantone® reference for every Total Ink Solutions standard color, with RGB and HEX values. For an exact, verified match, our UMX® system mixes to your target.

Safety, PPE & storage

• Wear nitrile gloves and safety glasses; avoid prolonged skin contact with uncured ink.
• Print with adequate ventilation; curing releases vapors—vent your dryer.
• Always stir the ink before use—standard practice to re-blend any settling.
• Storage & shelf life: keep sealed and out of direct sunlight. Shelf life is 1–2 years for standard inks; low-cure and all-polyester inks must be stored at 60–80°F. In high heat expect some expansion in the container—open carefully. Do not freeze.
• Uncured ink is not hazardous waste but should be handled and disposed of per local regulations.
• Refer to the Safety Data Sheet before use.

Compliance

CPSIA compliant — meets 16 CFR Part 1303 (<90 ppm lead in surface coatings) and CPSIA §101 (<100 ppm total lead); safe for use on children's apparel. Phthalate-free formulation.

⚠ WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Questions?

Total Ink Solutions
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone: 201-487-9600 · Fax: 201-487-9620
Email: sales@totalinksolutions.com