CYBOR™ 24" Space Saver – DTF Powder Shaker Dryer
Pickup available at TOTAL INK SOLUTIONS LLC NJ
Usually ready in 1 hour
Description
Description
The CYBOR™ 24" Space Saver gives you a full 24" curing width in a compact footprint. It applies hot-melt adhesive powder to your printed film and melts it down so the transfer is ready to press — the same job a full tunnel dryer does, in a unit built for a shop that does not have a tunnel's worth of floor to give it.
Space Saver or Tunnel Dryer?
Total Ink Solutions offers two ways to cure at 24":
| Unit | Choose it when |
|---|---|
| CYBOR™ 24" Space Saver | Floor space is tight, or you are adding a curing stage without rebuilding the shop around it. The lowest-cost route to a 24" cure. |
| 60CM DTF Tunnel Dryer | You are running continuously and want a full tunnel with balanced heating across the whole film width for commercial production volume. |
Where it sits in your workflow
Print the film, apply the powder, cure it here, then heat press. Your curing width should match or exceed your printer width — undersizing this stage is the most common and most expensive mistake in a DTF setup.
Why CYBOR™
CYBOR™ is Total Ink Solutions' own DTF equipment line, supported directly by Total Ink Solutions rather than through a third party.
Installation & safety
- This is a heated production unit. Allow clearance on all sides per the manual and do not enclose it.
- Powder curing releases fumes — adequate ventilation or extraction is required, not optional.
- Confirm electrical requirements before delivery.
- Never leave a heated unit unattended, and let it cool fully before cleaning or servicing.
Ships as freight, not parcel — a delivery appointment is arranged after the order.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.