Stretch Plastisol Ink – 61 Colors – For Polyester, Spandex & Performance Fabrics

Stretch Plastisol Ink is a highly flexible plastisol for polyester, spandex and performance fabrics — it stretches and recovers with the garment so prints on leggings, activewear and athletic gear won't crack or split. 61 colors, CPSIA-compliant and phthalate-free, made in Hackensack, New Jersey.

61 colors. Pint, quart, gallon and 5 gallon. Heat cure. Made in the USA.

Always run a test print first. Before any production run, print, fully cure and stretch-test on your exact garment; also check opacity, hand and dye migration. It's the best habit in the shop — if you're not sure on settings, call us at 201-487-9600 before you run the job.

What it prints on

• Spandex / elastane, polyester and performance blends — leggings, activewear, athletic gear
• Any print that must stretch and recover without cracking
• Low-bleed behavior on polyester; test dye migration on your fabric

Printing & curing

• Mesh: 110–160 for opacity; up to 200+ for lighter prints
• Squeegee: 65, 75 or 80 durometer — or a 70/90/70 triple durometer
• Flash: 240–260°F; keep flash brief on poly
• Cure: full ink film to 290–310°F (143–154°C) — confirm with a temp gun or donut probe
• Stir before use

Recommended companion products

• Quick Flash Reducer — thins for easier printing.
• Soft Hand Base — softer, more flexible hand.
• UMX® Pantone® Mixing Colors / UMX® Mixing Kit.
• Cleanup: OPTI Wash 125 and OPTI Spot 303.

How close are we to your Pantone?

See our Standard Color → Pantone® (PMS) Match Chart — the closest Pantone® reference for every Total Ink Solutions standard color, with RGB and HEX values. For an exact, verified match, our UMX® system mixes to your target.

Safety, PPE & storage

• Wear nitrile gloves and safety glasses; avoid prolonged skin contact with uncured ink.
• Print with adequate ventilation; vent your dryer.
• Always stir before use.
• Storage & shelf life: keep sealed, out of sun. Shelf life 1–2 years. As an all-polyester ink, store at 60–80°F. In high heat expect container expansion — open carefully. Do not freeze.
• Refer to the Safety Data Sheet before use.

Compliance

CPSIA compliant (16 CFR 1303 <90 ppm; CPSIA §101 <100 ppm total lead) — safe for children's apparel. Phthalate-free.

⚠ WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Questions?

Total Ink Solutions
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone: 201-487-9600 · Fax: 201-487-9620
Email: sales@totalinksolutions.com