Extreme 270° Low Cure Plastisol Ink – 62 Colors – For All Fabrics

Extreme 270° Low Cure Plastisol Ink is our lowest-cure ink — a dye-migration-resistant plastisol that fully cures at just 260–280°F (270°F nominal) and prints on all three fabric types: 100% cotton, 50/50 blends, and 100% polyester. The ultra-low cure is what stops polyester dyes from bleeding and protects heat-sensitive and sublimated garments from scorch, while staying low-bleed with great stretch. Bold, opaque color in 62 colors. CPSIA-compliant and phthalate-free, made in Hackensack, New Jersey.

62 colors. Quart, gallon and 5 gallon. Heat cure. Made in the USA.

Also available in larger quantities — 30-gallon and 55-gallon drums; call 201-487-9600 for volume and discount pricing.

Features & benefits

• Extreme low cure — 260–280°F — the lowest cure in our line; fully fuses cool to fight dye migration and scorch
• Prints all three fabrics — 100% cotton, 50/50 blends, and 100% polyester
• Dye-migration resistant — the cool cure keeps polyester dyes from bleeding into your print
• Low-bleed & great stretch — clean color that flexes with the garment without cracking
• Protects heat-sensitive garments — ideal for poly, performance and sublimated blanks that scorch at standard cure
• Saves energy — lower dryer temps, faster line speeds
• 62 colors, quart to 5 gallon (plus 30 & 55 gallon drums) · CPSIA-compliant & phthalate-free, made in the USA

Always run a test print first. Before any production run, print and fully cure a test on your exact garment and check opacity, hand, dye migration and wash-fastness. It's the best habit in the shop — if you're not sure on settings, call us at 201-487-9600 before you run the job.

What it prints on

• 100% cotton — full opacity, bright color at low temp
• 50/50 cotton/poly blends — the cool cure holds back dye migration
• 100% polyester — jerseys, performance and sublimated garments; the extreme low cure is your best defense against bleed and scorch

Printing & curing

• Mesh: 110–160 for opacity; finer (200–355) for detail and halftones
• Squeegee: 65, 75 or 80 durometer — or a 70/90/70 triple durometer
• Flash: 240–260°F; keep flash low and brief to avoid triggering dye migration
• Cure: curing is a time-and-temperature process — bring the full ink film to 260–280°F (127–138°C); the low cure is what keeps polyester dyes from bleeding; confirm with a temp gun or donut probe, not dryer air temp

Recommended companion products

• IronBlock LC Grey Blocker Underbase — 270°F low-cure grey underbase for the toughest dye-migration jobs.
• Quick Flash Reducer — thins for easier printing.
• UMX® Pantone® Mixing Colors / UMX® Mixing Kit.
• Cleanup: OPTI Wash 125 and OPTI Spot 303.

How close are we to your Pantone?

See our Standard Color → Pantone® (PMS) Match Chart — the closest Pantone® reference for every Total Ink Solutions standard color, with RGB and HEX values. For an exact, verified match, our UMX® system mixes to your target.

Safety, PPE & storage

• Wear nitrile gloves and safety glasses; avoid prolonged skin contact with uncured ink.
• Print with adequate ventilation; vent your dryer.
• Always stir before use.
• Storage & shelf life: keep sealed, out of sun. Shelf life 1–2 years. As a low-cure ink, store at 60–80°F. In high heat expect container expansion — open carefully. Do not freeze.
• Refer to the Safety Data Sheet before use.

Compliance

CPSIA compliant (16 CFR 1303 <90 ppm; CPSIA §101 <100 ppm total lead) — safe for children's apparel. Phthalate-free.

⚠ WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Questions?

Total Ink Solutions
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone: 201-487-9600 · Fax: 201-487-9620
Email: sales@totalinksolutions.com